The Class IV and Class V hitches we offer for your 2008 Ram 2500 pickup, viewable on the link provided for you, are designed for use on trucks that have a factory-installed standard bumper or in conjunction with a factory welded on hitch. We have no custom-fit aftermarket Class IV or Class V hitches for your truck that will work with your roll pan bumper.
You may be able to install a universal-fit hitch such as the Curt Class V Universal Weld-on Receiver Hitch # 15903 or # 15902 but you'll... view full answer...
Edge does have a pod mount for their programmers that does fit your 2004 Dodge Ram 2500 with the part # EP38504 but the # EP38405 does not fit. The numbers are really close though! view full answer...
We do offer a locking tailgate option for your 2011 Ram 1500, but the # LH-007 you mentioned is a fit for Dodge Ram trucks through the 2008 model year, and therefore wouldn't work on your truck.
Although a manual lock of that style isn't available, we do offer a powered tailgate lock from Pop&Lock, part # PAL8350 which works for regular and crew cab models with the short bed. If you have a Quad Cab or a Crew Cab with the long bed, you'd also need the extension kit, part # PL9510. You can... view full answer...
The best way to pick out replacement velcro strips for a tonneau cover is first determining the brand and model of the cover that you have and then going by what the manufacturer offers as a replacement.
The part # A60270 that you referenced is the correct replacement strip for if you have an Access brand TonnoSport or Vanish cover and it measures 17 inches long and 1 inch wide. If you have a different cover let me know, but I also attached a link to all of the replacement strips we offer... view full answer...
The two-step Lippert Manual Pull-Out Step, # LC432682, has step dimensions of 24-1/4 inches wide x 8-1/4 inches deep, with mounting base dimensions of 25-1/4 inches wide x 8-3/4 inches deep and bolt hole centers measuring 24 inches wide x 7 inches deep.
The three-step version of the Lippert Manual Pull-Out Step, # LC432687, has the same step size but a slightly different mounting base dimensions of 27-1/2 inches wide x 9 inches deep, with bolt hole centers measuring 26-1/4 inches wide... view full answer...
Due to the short bed on your 2011 Dodge Ram 1500 Crew Cab, the only way you will be able to successfully tow a fifth wheel trailer without having the front of the trailer loft strike the rear of the cab during turns would be to use a Sidewinder extended pin box. The Sidewinder relocates the pivot point from the connection of the hitch and the king pin to the point where the pin box connects to the trailer, thus providing 22 inches of additional clearance between the rear of the cab and... view full answer...
Westin makes great products, especially OEM-style bumpers that match the factory specs. Speaking of which, we have exactly what you are looking for! If you would like a factory looking bumper that matches the factory specs then you can go with Westin Perfect Match Series Rear Step Bumper # 31017 for chrome. The 1" hitch ball hole lets you haul up to 5,000lbs when a ball is added to it. For a 1-7/8" Hitch Ball use # C40002 and for a 2" Hitch Ball use # 40038. view full answer...
Yes! For the 60 inch Access LED light strip use # A80170. And for the 39 inch strip, use # A80150.
There is also a 24 inch model, # A80296.
And there is an 18 inch, battery powered model, # A80312.
We got you covered! We have many truck bed lighting options. I have included a link to all of them for you to the right. view full answer...
The Stromberg-Carlson 5th Wheel Tailgate you mentioned, part # VGD-02-100 will fit your 2006 Ram 1 ton.
The tailgate is only available in black, but could easily be repainted to the desired color that would match your truck.
I have linked you to the other available tailgates for your 2006 Ram. view full answer...
Yes, for a 2008 Dodge Ram 1500 Quad cab with front and rear 40/20/40 split bench seats Clazzio offers light gray, gray, beige, and black seat covers. They are all intended for cloth seats only on the truck.
I have also included a link to all of the Clazzio custom fit seat covers for your truck. Please use the navigation on the left side of that page to select the proper configuration of your seats to be sure you get the right style of covers. view full answer...
We do sell tuners that can display that information. Your options would be based on the engine in your 2007 Dodge Ram 2500. For example, if you have the 4.7L V8, 5.7L V8 - HEMI, or the 6.4L V8 - HEMI, the Edge Gas Evolution CTS3 Performance Tuner - Color Screen, part # EP99YR, would be compatible with your vehicle. It would have a tachometer and a speedometer. Unfortunately, we do not sell replacement instrument clusters for any vehicles.
I have included a product description link and... view full answer...
Hopkins offers a T-Connector type set up, part # HM42137 that would plug inline with the existing 7-way on your bumper and provide a 7-way in your truck bed. The wiring harness is 8 feet long, but any existing slack can be taken up and bundled up under the vehicle with zip ties.
Using the T-Type connector will allow a 7-way to remain at the rear bumper while adding one to the truck bed, which you would not have if you simply relocated the existing 7-way to the truck bed.
The HM42190 you... view full answer...
Your best option would be to look under the truck to see if you can make out any brands of gooseneck hitch or part numbers.
If you can at least see a brand name or make out the general shape of the hitch and the installation hardware you could compare that to the link I attached to the right that has all of the gooseneck hitches we carry confirmed to fit your 2006 Dodge Ram 3500. view full answer...
You would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. view full answer...
We have what you need, but the item you linked to, # DM8553004-12 is for the 2500 and 3500 series. You need the Custom Installation Kit w/ Base Rails for Demco Hijacker SL Series 5th Wheel Trailer Hitches, # DM8553010-12 for the 1500 series 2009 Dodge Ram Pickup. view full answer...
Between the Titan BrakeRite # T4835700 and the CTS HydraStar # HBA16 our installers prefer the HydraStar overall. Naturally, RF-controlled units have the potential for interference issues that do not come up with a wired system.
For a truck to be used with an EOH-disc-brake equipped trailer it must have a brake controller that is compatible with this type of braking system. Many controllers, such as Tekonsha units like the P3 # 90195, have the capability to be used with either electric... view full answer...
None of the Reese weight distribution shanks have a drop of 17 inches. The longest drop comes from # RP3344 and it has a max drop of 8-5/8 inches when used with a round bar system, 7-58 inches drop when used with a trunnion bar system. I have included a link to all of the Reese weight distribution shanks we carry. view full answer...
I spoke with my contact at Cipa about your 2012 Dodge Ram 2500 SLT. They do not offer a slip-on mirror for trucks with extendable mirrors, or stock mirrors that have additional lighting features like LED turn signals, auto dim, memory and puddle lights. If your truck has these features they do not have a custom mirror that would work. If your truck does not have the features listed above then the CIPA Custom Towing Mirrors, part # CM11400 will work for you.
I recommend a universal mirror... view full answer...
The only 12 inch slipper spring equalizer we offer is the part # E4541-Z.
For shackle bolts you would need the part # 166079, for equalizer bolts you would need # TRFA71063, cotter pin part # 165649, and for spring keeper bolts part # 7-7.
We do not have all of this in a kit though. view full answer...
Go To Results